Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterFast, Reliable Garage Door Installation Across Dallas
A new garage door installation in Dallas typically runs $700-$2,200, depending on the door’s width, material, and whether the opening needs track or framing work first. Most single and double door installations we handle are completed in one day, with the written price confirmed before any hardware leaves the truck. If you’re north of downtown, in Garland, or out toward Carrollton, you’re on a route our crews drive every week. Call (682) 452-1782 and you’ll get a named technician and a time window, not a callback queue.
Dallas isn’t a market where a generic install process works. The housing stock here has its own rhythms. We see doors that were original to the house when it was built in the Clinton administration, paired with openers that still run on chain drives and limit switches. The climate does things to those systems that a technician in Ohio or Phoenix would never encounter. You need someone who knows what a hail-dented 1997 steel panel looks like, and what the black clay underneath your slab is doing to the tracks above it. That’s why specificity matters more here than in almost any other city in Texas.
Why Servo Garage Doors Arlington Is Dallas’s Preferred Garage Door Installation Company
Servo has operated since 2015, independently owned under The Haven Standard. Marcus Deller leads the team, and the license number sits on the page, not buried in fine print. The documentation system is the product. Every visit closes with a photo record showing what we found and what we did, and every install is quoted at a flat written price before work begins. That’s Clause 1. We don’t ask you to call for a quote. We hand you the number in writing, and it doesn’t move after the fact.
Dallas customers tend to research before they call. We’d rather show evidence than make promises. Our Garage Door Installation team arrives with the scope already written, and Clause 4 means the failed component gets photographed before any replacement is quoted. That’s the rule Marcus built the company on in 2015, and it’s the reason a homeowner who read our three-star reviews still calls. The 365-Day Done Right Promise is in the paperwork, and the Free Second Opinion applies to any competing written estimate you bring in. No coupon code. No conditions.
On the local side, we know which Dallas neighborhoods were built by DR Horton in the late 1990s and which ones still have original one-piece doors hanging in the rafters. That knowledge matters when you’re deciding between a retrofit and a full replacement. We don’t lead with urgency. We lead with what the door is telling us.
Our Garage Door Installation Services in Dallas
New Door Installation
A new door installation in Dallas starts with measuring the opening and checking the condition of the jambs, tracks, and header before anything is ordered. Clay soil movement tends to shift frames over time, so a door that fit perfectly in 1999 may need the opening corrected before a new sectional goes in. We handle that as part of the install, and the line item sits on the written scope. Typical cost: $700-$2,200, with the exact number depending on width, insulation level, and whether you’re replacing a single or double door.
Single Car Door
Single-car doors in Dallas are usually nine feet wide, but plenty of older homes in Mesquite and Garland have eight-foot openings that require ordering to spec. If you’re replacing a single door on a 1980s home, we’ll check the spring system to see whether it’s the original pair. Most are. You don’t want new panels on old springs that are already past their cycle rating. A single door with a new high-cycle spring set starts around $700 installed, including panel haul-away.
Double Car Door
Double doors are the standard on Dallas suburban homes, and most of the ones we install are 16 feet wide. The original 1990s doors on those houses were often non-insulated steel, and after 25 years of summer sun on a west-facing wall, some sections have warped enough to throw the balance off. A new double door in Dallas runs $1,100-$2,200. That range includes insulation upgrades, new track, and high-cycle springs rated for 25,000 cycles rather than the 10,000 cycle standard that came with the original hardware.
Custom Garage Door
Custom doors in Dallas go beyond dimensions. We’ve built doors for homes with carriage-style facades in Lakewood, modern full-view aluminum for newer builds in Richardson, and wood-look steel for properties where an HOA mandates specific aesthetics. The design parameters affect the price, but the process doesn’t change: written flat price first, photo documentation at the end. Custom orders take longer to arrive, so if you’re working toward a specific move-in or listing date, start the conversation six weeks out.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Dallas
We stock and install all major brands, including LiftMaster, Chamberlain, Genie, and Clopay. For Dallas homeowners, parts availability is the real question. If a Clopay panel section from a door installed in 2004 gets hail-damaged in a spring storm, we can source and install the replacement section without forcing a full door replacement. That’s not true at every shop, especially during post-storm weeks when demand spikes across the Metroplex. We carry common panel sections for 1990s and 2000s era builds precisely because Dallas has so many of them. The same applies to Chamberlain and Genie opener logic boards, which tend to fail after sustained temperature swings inside a garage that hits 130°F in August.
Common Garage Door Installation Problems We See in Dallas Homes
- Legacy spring failure during a new install: Original torsion springs from 1980s and 1990s tract homes snap without warning, dropping a 150-350 lb door and trapping cars inside. When we install a new door, we always spec new springs rated for the door’s weight. Reusing old springs is how you get a door that fails in year one.
- Hail-damaged panels on 1990s-era steel doors: Golf-ball-sized hail leaves dimples and cracks that compromise the door’s structural balance. Once the panel deforms, rollers bind and sections jam. We photo-document the damage for your insurance adjuster before quoting panel replacement at $250-$500 per section, or a full door replacement if the damage is widespread.
- Clay-soil track misalignment: Expansive black clay under Dallas foundations heaves after spring rains and settles through summer drought. That movement racks door frames, binds tracks, and blows out weatherseal gaps within a year of a fresh install. We account for this on every new install by checking slab level and adjusting track placement accordingly.
- South-facing door warp and seal failure: A south or west-facing garage door in Dallas bakes in 130°F+ interior heat for months. PVC bottom seals turn brittle, spring lubricant breaks down, and steel sections warp. When you install a new door, the material and insulation choice should factor in which direction your garage faces. We tell you what’s actually going to hold up, not what looks good on a brochure.
Pricing for Garage Door Installation in Dallas, TX
Here are the line-item ranges we quote in Dallas. These are the numbers we put in writing before work begins:
| Service | Dallas Price Range |
|---|---|
| New Door Installation | $700-$2,200 |
| Panel Replacement | $250-$500 |
| Spring Repair (during install) | $180-$340 |
| Opener Installation | $250-$550 |
| Track Realignment | $120-$240 |
What moves the number on a new door install in Dallas is mostly width and insulation. A single 9-foot non-insulated steel door sits at the bottom of the range. A double 16-foot insulated door with upgraded springs and new track runs toward the top. If your existing opener is from the 1990s, factor in an opener replacement at $250-$550; older chain-drive units rarely handle the weight of a new insulated double door. Every quote is flat and written, and the price is agreed before any work starts. Estimates are free. Call (682) 452-1782.
One more thing worth saying plainly. The price we quote is the price you pay. No one discovers a surprise line item after the door is in. That’s the entire point of Clause 1.
We Also Serve Cities Near Dallas
Our Garage Door Installation in Dallas work regularly takes us into the surrounding Metroplex. We run the same routes through Irving, Grand Prairie, Euless, and Grapevine. Same written-first pricing, same photo documentation, same crew. If you’re right on the Dallas city line and not sure which area you fall into, call and we’ll tell you which route covers you.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Garage Door Installation in Dallas
A hail-damaged door is worth repairing if the damage is limited to one or two panels and the rest of the door is structurally sound; individual panel replacement in Dallas runs $250-$500 per section. If three or more panels are dented, or the bottom section is bent badly enough to break the weatherseal, replacement is the better financial call at $700-$2,200 for a new door. We document the damage with photos for your insurance adjuster either way. Call (682) 452-1782 and we’ll tell you what the documentation shows before you commit to anything.
Original springs on a Dallas home built in the 1980s or 1990s are almost always past their rated cycle life, and if the spring has never been replaced, it’s original. During a new installation, we remove and inspect the springs and photograph them before any replacement is quoted, which is Clause 4. We won’t install a new door on old springs. If we’re doing a new install, the springs are replaced at $180-$340 as part of the job.
Usually no. A 1990s chain-drive opener was sized for a non-insulated steel door that weighed significantly less than today’s insulated double doors. The motor may lift it for a while, but the gear and sprocket wear accelerates and the limit switches can drift. We include an opener assessment with every door install, and a replacement runs $250-$550, with LiftMaster and Chamberlain units being the most common in Dallas.
South-facing garage doors in Dallas absorb direct sun for most of the day, and the interior of an attached garage can exceed 130°F in summer. That heat warps steel sections, breaks down PVC weatherseals, and degrades spring lubricant at a rate north-facing doors don’t experience. If your garage faces south or west, we recommend insulated steel or composite materials that hold their shape better under sustained heat. It’s a Dallas-specific failure pattern we see every summer.
A properly installed door on Dallas clay soil will stay aligned longer than your old one if the technician accounts for slab movement at the time of install. We check the foundation level before setting tracks, and we adjust for the seasonal heave-settle cycle that’s caused by the black clay under most Dallas homes. A door that was installed without that check can bind within a year. Track realignment later runs $120-$240, but doing it right in the first place is the cheaper path.
Written by Marcus Deller, Owner at Servo Garage Doors Arlington, serving Dallas since 2015.