Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Arlington?
Replacing a single garage door panel in Arlington, Texas, typically costs between $250 and $500, depending on the manufacturer, the age of the door, and the specific design of the panel. This price includes the labor to swap out the damaged section and the cost of the replacement part itself. Because garage doors are often discontinued or have specific color-matching requirements, the final cost is determined by whether we can source an exact match or if a custom order is required to restore your door’s integrity.
At Servo Garage Doors, we believe in transparency. We don’t hide our pricing behind a request for a callback. We provide a written price and a documented scope of work before we touch a single bolt. If you are dealing with a damaged section, call us at (682) 452-1782 for a free estimate.
Panel Replacement Cost Breakdown (2026)
When you call us for a panel replacement, we don’t guess. We look at the manufacturer’s sticker, identify the specific model, and check the availability of the panel. Below are the typical market ranges we see in Arlington for 2026. Keep in mind that these ranges reflect the cost of the panel and the professional installation required to keep the door balanced and safe.
- Standard Steel Panel (Non-Insulated): $250-$350 per panel. These are common on builder-grade doors found in many Arlington subdivisions.
- Insulated Steel Panel: $300-$450 per panel. These require careful handling to ensure the insulation layer remains intact during the swap.
- Carriage House or Designer Panel: $350-$500+ per panel. These often feature complex trim or overlays that require specific factory sourcing.
- Bottom Panel Replacement (includes bottom seal): $300-$500. The bottom panel often takes the brunt of the impact and weather exposure, requiring a new bottom seal to ensure the door closes properly against the concrete.
Factors that push the price toward the higher end of these ranges include the need for specialized color matching due to sun fading in the Texas heat, the complexity of the door’s hardware configuration, and the rarity of the manufacturer’s specific panel design. If you have a home with a custom door, we prioritize getting the exact match rather than a “close enough” solution.
What Affects Panel Replacement Pricing in Arlington
Arlington’s climate and local housing landscape play a significant role in how and why panels fail. We see specific patterns in our service calls across neighborhoods like Dalworthington Gardens, Pantego, and North Arlington.
- Sun Fading and UV Damage: The intense Texas sun causes paint to fade unevenly. A brand-new panel installed today will look different from a 10-year-old panel sitting next to it. While we can’t stop the sun, we account for the material cost of sourcing panels that are designed to match existing fading patterns as closely as possible.
- Humidity and Rust: In areas with higher moisture, such as homes near the Trinity River or those with poor drainage, the bottom panel often suffers from rust. If the rust has compromised the structural integrity of the steel, a simple patch won’t hold. We have to replace the entire section.
- Manufacturer Availability: If your door was manufactured by a company that has been acquired or has changed its design specifications (like some older Wayne Dalton or Amarr models), sourcing the exact panel can take more time. We verify the model number during our initial assessment so you know exactly what is available before we proceed.
- Hardware and Track Alignment: When a panel is damaged, it often puts stress on the surrounding rollers, hinges, and tracks. We don’t just swap the panel; we inspect the entire Panel Replacement in Arlington service to ensure the door tracks properly. If the track was bent during the impact that damaged the panel, it adds to the labor time.
- Safety System Integration: The garage door panel is part of a high-tension system. When we replace a panel, we must release the tension on the springs and cables to safely remove the damaged section. This is not a task for a DIY homeowner. The labor cost reflects the expertise required to manage these dangerous components safely.
BeforeAfterThe Servo Garage Doors Difference
We operate under The Haven Standard, which dictates how we treat every customer. We don’t believe in “call for a quote” mystery games. You deserve to know what the work costs before we start. This is Clause 1 of The Haven Standard: a written price and a written scope are delivered before any work begins.
Furthermore, Clause 4 of The Haven Standard is why our technicians document every visit with a photo record. Before we tell you that a panel needs to be replaced, we take a photo of the damage. We show you the failed component. We don’t ask you to trust us; we show you why the repair is necessary. Marcus Deller, our owner, founded Servo Garage Doors in 2015 on the principle that evidence-based service is the only way to operate in the garage door industry.
When you call us, you aren’t getting a salesperson. You are getting a technician who is background-checked and uniformed. Whether you have a LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, or Raynor door, we have the experience to handle the panel replacement correctly the first time.
How to Save on Panel Replacement
While garage door parts are commodity goods with fixed manufacturing costs, there are ways to manage the expense of a panel replacement without sacrificing quality.
- Get a Second Opinion: If another company has told you that you need a full door replacement because a single panel is damaged, call us. We offer a free second opinion on any written estimate. If we can fix it with a panel replacement, we will tell you.
- Don’t Ignore the Damage: A dented panel might seem like a cosmetic issue, but it can cause the door to bind in the tracks. This puts extra strain on your garage door opener, which can lead to a motor burnout or a broken gear assembly. Fixing the panel early prevents a more expensive garage door repair later.
- Maintain Your Hardware: Keeping your rollers lubricated and your tracks clear of debris helps the door move smoothly. A door that moves smoothly puts less stress on the panels, reducing the risk of them buckling under pressure.
If you are unsure about the state of your door, call (682) 452-1782. We will come out, inspect the damage, and provide a written price. If the panel is salvageable, we’ll be honest about that, too.
Safety Warning: High-Tension Components
It is important to understand that your garage door is under significant tension. The springs and cables that lift your door are designed to hold hundreds of pounds of force. Attempting to remove a panel without first securing and releasing this tension is dangerous and can lead to severe injury or death. We strongly recommend that all panel replacements be handled by a trained professional who uses proper safety equipment and follows established industry protocols. Do not attempt to disconnect cables or unscrew panel hinges yourself.
FAQs - Panel Replacement Cost
How much does it cost to replace one panel on a garage door in Arlington?
Replacing a single panel typically costs between $250 and $500. This price depends on the specific manufacturer, the door’s age, and the type of material (e.g., standard steel vs. insulated or designer panels). Call (682) 452-1782 for an exact quote based on your specific door model.
Is it cheaper to repair a panel or replace the whole door?
If only one or two panels are damaged, replacing the panels is usually significantly cheaper than replacing the entire door. However, if the door is very old or if the structural integrity of the frame has been compromised, a full door replacement might be more cost-effective in the long run. We provide upfront, written pricing for both options so you can make an informed decision.
Can you match the color of my existing door?
We do our best to source panels that match the original manufacturer’s specifications. However, due to sun exposure and the natural aging of paint, a new panel may have a slightly different shade than the rest of your door. We will discuss the expected results with you before we begin any work.
How long does it take to replace a garage door panel?
The physical installation of a panel usually takes a few hours, depending on the complexity of the door and the hardware. However, the time from our initial assessment to the installation depends on how quickly we can source the specific panel for your door model. We will give you a clear timeline when we provide your written estimate.
Do you offer free estimates for panel replacement?
Yes. We believe in transparency. If you are concerned about a damaged panel, call (682) 452-1782. We will come to your home, inspect the damage, and provide a written price before we start any work. There is no obligation.
Pricing reflects the Arlington market as of 2026. Servo Garage Doors Arlington offers free estimates - call (682) 452-1782. Written by Marcus Deller, Owner at Servo Garage Doors, serving Arlington since 2015.
What Our Customers Say
"Opener had been stalling for months. The tech showed me the logic board reading, replaced the board instead of the whole unit, and it cost a third of the other quote I had."
- Robert K."Cables came off the drum on a Sunday. Someone answered, someone came, and the written warranty was one page I could actually read."
- Harriet L."The report they email afterwards has the cycle count on the springs and roughly when to expect the next one to go. Genuinely useful."
- Miguel S.