Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Arlington?
Garage door spring replacement in Arlington typically costs between $180 and $340, including both parts and labor. This price range covers the standard replacement of a pair of torsion springs on a residential door, ensuring your garage door operates safely and balances correctly under the tension required for daily use.
At Servo Garage Doors, we believe in radical transparency regarding costs. Every service visit begins with a technician inspecting your door to identify the exact cause of failure, followed by a written price quote before any work commences. This is Clause 1 of The Haven Standard, our commitment to ensuring you never face surprise charges or vague estimates. If you are dealing with a broken spring in Arlington, call (682) 452-1782 to receive an accurate, upfront quote today.
Spring Replacement Cost Breakdown (2026)
When you look at the cost of spring repair, it is helpful to understand that the price is primarily driven by the type of spring system, the weight of your garage door, and the specific cycle rating of the replacement springs. Below is a breakdown of typical costs in the Arlington area based on our work with 18,000+ garage doors since 2015.
| Service Description | Estimated Cost Range |
|---|---|
| Standard Torsion Spring Replacement (Pair) | $180 - $340 |
| Single Torsion Spring Replacement | $150 - $220 |
| Extension Spring Replacement (Per Pair) | $160 - $280 |
| High-Cycle Spring Upgrade (Longer Life) | $220 - $360 |
| Emergency Same-Day Service Surcharge | $0 (We do not charge extra for speed) |
These figures represent the total investment for a professional, code-compliant repair. If you are comparing quotes from other companies, remember that Servo Garage Doors provides a free second opinion on any written estimate you bring to us. If you have a quote in hand from another local provider, bring the paperwork to your appointment, and we will verify the scope and pricing against our own standards.
What Affects Spring Replacement Pricing in Arlington
Every home in Arlington has unique requirements, and the final cost of your spring replacement depends on several technical factors. We do not believe in one-size-fits-all pricing, as that rarely reflects the reality of the hardware installed on your home.
- Spring Wire Diameter and Length: Springs are engineered to match the specific weight of your door. A heavier solid wood carriage-house door requires a different wire gauge than a lightweight aluminum door. We measure the existing spring wire diameter and length to calculate the exact tension required, ensuring your door doesn’t overwork your opener.
- Door Weight and Balance: If your door has been running unbalanced for a long time, it may have caused secondary damage to the cable drums or the bottom fixtures. We assess these components on every visit because Clause 4 of The Haven Standard requires us to photograph the failed component and document the state of the entire system before we quote the repair.
- Cycle Life Rating: Standard builder-grade springs are often rated for 10,000 cycles. We often recommend high-cycle springs, which are rated for 25,000 to 50,000 cycles. While the upfront material cost is slightly higher, the longevity in the North Texas climate-where metal expands and contracts with extreme heat-makes this a better long-term investment.
- System Accessibility: Most Arlington homes feature standard garage configurations, but some custom homes or detached garages have limited overhead clearance, which complicates the installation process. We account for the time required to safely maneuver within these spaces without damaging your property.
- Hardware Condition: If the torsion tube, center bearing, or end-bearing plates are corroded or seized, they may need replacement to ensure the new springs operate smoothly. We identify these issues during the initial inspection and include them in your written scope so you know exactly what you are paying for before we turn a single wrench.
Safety is our primary concern. Garage door springs are under immense tension, often holding the weight of a 200-pound door. A snapped spring releases this energy instantly, which can cause severe injury if you attempt to replace it without specialized winding bars and training. If you suspect a broken spring, please keep family members and pets away from the garage and call us at (682) 452-1782.
BeforeAfterHow to Save on Spring Replacement
The most effective way to save on garage door maintenance is to avoid reactive repairs. When you notice signs of spring failure-such as a loud bang in the garage, the door refusing to lift, or a visible gap in the coils of the spring-addressing it immediately prevents collateral damage to your opener’s gears and motor. To learn more about how we maintain systems, visit our home page.
We also advise homeowners to avoid “bargain” pricing that relies on cheap, low-cycle springs. A spring that costs $50 less today but fails in six months is not a bargain; it is a recurring cost. We use high-quality, oil-tempered springs designed to withstand the Arlington climate. By getting the job done right the first time under our 365-Day Done Right Promise, you avoid paying for the same repair twice.
Finally, we encourage you to utilize our free estimate policy. We do not require a service call fee just to walk through the door and provide a quote. If you have an existing quote from another company, bring it to us. Our commitment to Clause 1 means we will provide a clear, written scope of work based on our inspection, not on what a competitor wrote down. Call (682) 452-1782 to schedule your inspection.
How We Document Your Repair
At Servo Garage Doors, we operate under The Haven Standard, which dictates that the customer must see the evidence before any repair is authorized. We do not ask you to trust us; we ask you to look at the photos we take.
- Arrival and Inspection: Our technician arrives in a marked vehicle and immediately assesses the garage door system.
- Photo Record: Per Clause 4, we photograph the failed spring, the wire, and any worn components. You see exactly what broke and why.
- Written Quote: We present a flat-price written quote for the exact parts and labor required. No hidden fees or “while we’re at it” upsells.
- Execution: We perform the repair using tools calibrated for the specific tension of your door.
- Verification: We test the door’s balance and safety sensors, then provide you with a final photo record showing the new springs installed and the completed work.
This process ensures that every customer in Arlington understands exactly what they are paying for. If you need a Spring Replacement in Arlington, this is the standard of care you can expect from our team.
FAQs - Spring Replacement Cost
Is it cheaper to repair or replace a garage door spring?
You cannot “repair” a broken torsion or extension spring; once the metal snaps, the structural integrity is gone, and the only option is replacement. We always replace springs in pairs because if one has failed due to fatigue, the other is likely at the end of its life cycle as well, and replacing both ensures your door remains balanced and safe.
Do you charge extra for emergency spring replacement in Arlington?
No, we do not charge extra for emergency service calls. If your garage door is stuck and you cannot get your car out, we treat that as a priority. Our team is available 24/7, and we dispatch a technician to your home to handle the repair promptly. Call (682) 452-1782 for immediate assistance.
How long should a new set of springs last?
In the Arlington area, a standard set of high-quality springs should last 5 to 7 years for an average household that opens and closes the garage twice a day. If you use your garage more frequently, or if you opt for our high-cycle spring upgrade, you can expect significantly longer life. We provide a clear estimate of the expected cycle life during our consultation.
Can I replace the springs myself to save money?
We strongly advise against DIY spring replacement. Torsion springs are wound under extreme tension, and specialized tools like winding bars are required to adjust them safely. Improper handling can cause the spring to snap or the door to collapse, leading to serious injury or property damage. For your safety, please leave this to a trained professional.
What brands do you service?
We service all major garage door and opener brands, including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Regardless of the brand installed on your home, we have the experience and parts to restore your system to working order. Call (682) 452-1782 to discuss your specific door model.
Pricing reflects the Arlington market as of 2026. Servo Garage Doors Arlington offers free estimates - call (682) 452-1782.
Written by Marcus Deller, Owner at Servo Garage Doors, serving Arlington since 2015.
What Our Customers Say
"Straightforward. They gave me the range over the phone, confirmed it in writing on site, and did not try to sell me anything else while they were here."
- Evan T."Opener had been stalling for months. The tech showed me the logic board reading, replaced the board instead of the whole unit, and it cost a third of the other quote I had."
- Robert K."Cables came off the drum on a Sunday. Someone answered, someone came, and the written warranty was one page I could actually read."
- Harriet L.